Figure 30. Cable routing server models with sixteen 2.5-inch hot-swap drives, two 8i RAID adapters (hardware RAID)
Cable From To
1 Power cable for backplane 1 Power connector on backplane 1 Backplane 1 power connector on the
system board
2 SAS signal cable for
backplane 1
SAS 0 and SAS 1 connectors on
backplane 1
Connectors on RAID adapter 1
3 Power cable for backplane 2 Power connector on backplane 2 Backplane 2 power connector on the
system board
4 SAS signal cable for
backplane 2
SAS 0 and SAS 1 connectors on
backplane 2
Connectors on RAID adapter 2
Chapter 2. Server components 45
To Next Page
Loading...
