Lenovo ThinkSystem ST250 - Remove the Front Bezel

Figure 36. Front door removal
Remove the front bezel
Use this information to remove the front bezel.
“Read the
installation
Guidelines” on
page 54
“Power off the
server for this
task” on page
86
Step 1. Remove the front door (see “Remove the front door” on page 57).
Step 2. Lift the three plastic tabs to release left side of the bezel from the chassis; then, pivot the bezel as
shown to remove it from the chassis.
Figure 37. Front bezel removal
58 ThinkSystem ST250 Setup Guide