Table 10. Parts listing
Index
Description
Tier 1 CRU Tier 2 CRU FRU
Consumable
and
Structural
parts
For more information about ordering the parts shown in Figure 34 “Server components” on page 49:
http://datacentersupport.lenovo.com/us/en/products/servers/thinksystem/st250/7y45/parts
It is highly recommended that you check the power summary data for your server using Lenovo Capacity Planner
before purchasing any new parts.
1
5.25-inch LTO/RDX tape drive
√
2
5.25-inch optical disk drive
√
3
3.5-inch disk drive cage
√
4
Chassis
√
5
3.5-inch hot-swap drive backplane
√
6
3.5-inch simple-swap drive backplate
√
7
3.5-inch hot-swap drive
√
8
3.5-inch simple-swap drive
√
9
2.5-inch hot-swap drive
√
10
Front panel board assembly
√
11
2.5-inch disk drive cage
√
12
2.5-inch hot-swap drive backplane
√
13
Front fan
√
14
M.2 drive (42mm and 80mm)
√
15
Heat sink fan assembly
√
16
Flash power module
√
17
System board
√
18
CMOS battery (CR2032)
√
19
Processor
√
20
DIMM
√
21
TPM card
√
22
PCIe adapter
√
23
Intrusion switch
√
24
Rear fan
√
25
Fixed power supply unit
√
26
Redundant power supply unit
√
50 ThinkSystem ST250 Setup Guide
To Next Page
Loading...
