Lenze 8200 motec - Application options for function modules and communication modules in the 8200 motec and starttec

Automation
Overview
Lenze
3-3
8200 motec/starttec en 12/03
3
starttec motec motec with BUS I/O
Communication modules Type
Keypad E82ZBB ✓✓✓
Keypad XT E82ZBBXC ✓✓✓
LECOM-A RS232 E82ZBL-C ✓✓✓
Function modules Type
Standard I/O E82ZAFSC001 - ✓ -
Application I/O E82ZAFAC001 - ✓ -
BUS-I/O E82ZAFBxx1 - ✓ -
CAN (system bus) E82ZAFCC001 ✓
1)
✓✓
CAN I/O (system bus) E82ZAFCC201 - ✓ -
PROFIBUS-DP E82ZAFPC001 ✓
1)
✓✓
INTERBUS E82ZAFIC001 ✓
1)
✓✓
LECOM-B (RS485) E82ZAFLC001 ✓
1)
✓✓
AS-interface E82ZAFFC001 Function integrated ✓ -
as an option
1)
Always in conjunction with support frame for function modules E71ZJ001
All function modules (with the exception of the BUS I/O)
can also be used in conjunction with the 8200 vector.
The Keypad XT and Global Drive Control easy (GDC easy)
PC software, which simplify and speed up the operation of
the inverter by means of a simple menu structure and
assisted dialog boxes, are available for parameter settings
and diagnostics.
Application options for function modules and communication modules in the 8200 motec and starttec
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - e.mail: info@ctiautomation.net