3
Lenze
3-4
8200 motec/starttec en 12/03
Automation
Overview
Bus-compatible operating/display units for process
visualisation which can be integrated into the control
cabinet are available in various frame sizes for the
visualisation of inverter parameters and process data.
The DrivePLC is a freely programmable drive PLC which
operates in accordance with international standard
EN61131-3. In conjunction with the frequency inverter,
it can be used to set up distributed control tasks.
Extension boards can be used to extend the DrivePLC
input and output terminals.
The range is completed by bus-compatible, freely
programmable I/O terminals, which are used for interfacing
sensors and actuators with the bus.
Automation components
PLC or host
Global Drive Control GDC
Drive PLC Developer Studio
Drive PLC
with PROFIBUS and
CAN (system bus)
Fieldbus e.g. PROFIBUS
e.g. 8200 motec with BUS I/O
I/O function module
and PROFIBUS fieldbus
function module
e.g. starttec
with LECOM-A
communication
module and CAN
fieldbus function
module (system bus)
e.g. 8200 motec
with Keypad XT
operating module
and CAN fieldbus
function module
(system bus)
I/O system in IP20
(terminal extension)
Operating/display units for
process visualisation
CAN
(system bus; integrated)
Fieldbus CAN
(system bus)
Extension
boards
(can be
integrated into
Drive PLC)
e.g. starttec
with LECOM-A
communication
module and GDC
parameter setting
software
To Next Page
Loading...
