Automation
Overview
Lenze
3-5
8200 motec/starttec en 12/03
3
2.
e.g.
PROFIBUS-DP
INTERBUS
CAN
AS-interface
Control and operation via
Keypad, RS232 (GDC)
and/or control terminals
e.g.
BUS I/O
starttec 8200 motec
8200 motec
PLC or host
PLC or host
1.
e.g.
Standard I/O
Application I/O
starttec
Networking via fieldbus
and open-loop/closed-loop
control with digital and analog
inputs and outputs
The large selection of function/communication modules
enables various operation and communication concepts to
be set up according to requirements. The overview
illustrates example control, operation and parameter
setting options:
Parameter settings and
diagnostics during fieldbus
operation
8200 motec
PLC or host
3.
e.g.
• Keypad XT
• LECOM-A with
GDC easy
e.g.
• PROFIBUS-DP
• INTERBUS
• CAN
• AS-interfacestarttec
Fieldbus
Fieldbus
To Next Page
Loading...
