Lenze 8200 motec - Diagnostics and parameter settings; Keypad XT operating module

3
Lenze
3-6
8200 motec/starttec en 12/03
Automation
Diagnostics and parameter settings
The Keypad XT is available for visualising operating
parameters and parameter settings for the inverter. Eight
keys and a text display provide quick and easy access to
the inverter parameters via the transparent menu structure.
The Keypad XT is also used for the purposes of status
display and error diagnostics. In addition, its built-in
memory can be used to transfer parameters to other
inverters.
For ease of handling, the Keypad XT is housed in an easy-
to-use diagnosis terminal. A connecting cable is required
for the connection to the 8200 motec/starttec. The Keypad
XT can also be used on 8200 vector, 9300 vector, 9300
servo and Drive PLC devices.
The Keypad is suitable for installation in the control
cabinet. The differences between the Keypad XT and
Keypad are listed in the "Features" overview.
Keypad
Function keys
Status displays
Bar graph display
Function bar 1
Function bar 2
Parameters for change
Code number
Subcode number
Parameter value with unit
Dimensions of control cabinet assembly kit (Keypad only)
A
B
C
D
E
F
G
H
I
8
8
8
8
8
8
8
-
8
8
.
8
.
8
8
0.7 Nm
45.3
45.3
Keypad
Installation
kit
Control cabinet door
Keypad XT operating module
Diagnosis terminal (complete with Keypad XT) Order no. E82ZBBXC
Diagnosis terminal (complete with Keypad) Order no. E82ZBB
Keypad XT
Status displays
Transfer parameters
Active level
Help text
Menu or code number
Menu or subcode number
Parameter
Cursor
Function keys
A
B
C
D
E
F
G
H
I
Installation
kit
Control cabinet door
Keypad/controls
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - e.mail: info@ctiautomation.net