Automation
Diagnostics and parameter settings
Lenze
3-7
8200 motec/starttec en 12/03
3
Features
Keypad XT Keypad
Plain text display ✓ -
Menu structure ✓ -
Predefined basic configurations ✓ -
Text display ✓✓
Control keys 8 8
Non-volatile storage
for parameter transfer ✓✓
Password protection ✓✓
Control cabinet installation - ✓
Configurable menu ("user menu") ✓✓
Application-specific menus ✓ -
"Quick start-up" menu
✓ -
Can be used with 8200 vector, 8200 motec, Drive PLC,
9300 vector, 9300 servo, starttec 8200 vector, 8200 motec, starttec
Diagnosis terminal ✓✓
Degree of protection IP 20 IP 55
Diagnosis terminal with Keypad XT and connecting cable
Additional accessories Order no.
Keypad (without diagnosis terminal)
3)
E82ZBC
Control cabinet installation kit
2)
E82ZBHT
2.5 m connecting cable
1)
E82ZWL025
5 m connecting cable
1)
E82ZWL050
10 m connecting cable
1)
E82ZWL100
1)
The connecting cable is required to connect the diagnosis terminal or control
cabinet installation kit with the 8200 motec or starttec.
2)
The additional control cabinet installation kit is required if the keypad
(only E82ZBC) is to be installed in the door of the control cabinet.
(IP55 protection)
3)
Can only be used on the 8200 motec and starttec in conjunction with control cabinet
installation kit E82ZBHT.
To Next Page
Loading...
