Preface and general information
Legal regulations
1
l
10
EDBMB935X EN 8.0
1.2 Legal regulations
Labelling
Lenze 935X braking units are clearly labelled by the content of the nameplate.
Manufacturer
Lenze Drive Systems GmbH, Hans−Lenze−Straße 1, D−31855 Aerzen, Germany
CE conformity
Compliant with "Low voltage" EC Directive
Application as directed
935Xbraking units
ƒ are additional units for the Lenze controllers:
– 822X frequency inverters (8221 to 8227)
– 824X frequency inverters (8241 to 8246)
– 82Vector frequency inverters (15 − 90 kW)
– 93XX servo inverters (9321 to 9333)
– Operation with the 820X or 821X frequency inverters is possible.
ƒ must only be operated under the ambient conditions prescribed in these
Operating Instructions.
ƒ Are components
– for installation within a machine.
– for assembly with other components into a machine.
ƒ are electrical equipment for installation within control cabinets or similar
closed electrical operating areas.
ƒ meet the protection requirements of the "Low voltage" EC Directive.
ƒ Are not machines in the context of the EC machinery directive.
ƒ Are not household appliances but are intended solely for utilisation as
components for industrial use.
Drive systems with a 935X braking unit
ƒ The user is responsible for the compliance of the machinery application
with the EC directives.
Any other use shall be deemed improper!
To Next Page
Loading...
