Lenze DeviceNet PT E82ZAFVC010 - Status Display

Commissioning
Status display
4
EDK82ZAFVC010 DE/EN/FR 2.0
63
l
inbetrieb−statusanzeige AFV0xx
Status display
E82ZAFD101A*
Pos Status display Explanation
1
Connection status to basic device (LED, green / red)
OFF
Function module is not supplied with voltage,
external voltage supply is switched off
GREEN
BLINKING
Function module is supplied with voltage but not
connected to the controller.
Reason:
Basic device is
l switched off
l is being initialised
l not available
Constantly ON Function module is supplied with voltage and is
connected to the basic device
RED
BLINKING Internal error, Lenze setting has been loaded
Constantly ON Internal error of the function module
2
Connection status to bus (LED, green / red)
OFF
l No connection with the master.
l Function module is not supplied with voltage.
GREEN
BLINKING Dup_Mac_ID" test phase. Not yet connected to master
(scanner).
Constantly ON DeviceNet connection completed.
RED
BLINKING No communication because time limit has been
exceeded
Constantly ON Critical bus error