Need help?Do you have a question about the Lenze E84DGFCp Series and is the answer not in the manual?
General| Brand | Lenze |
|---|---|
| Model | E84DGFCp Series |
| Category | Conference System |
| Language | English |
Covers general, device-specific safety rules, and residual hazards.
Defines intended use, product features, variants, and physical connections.
Specifies technical details including operating conditions, standards, and communication protocols.
Covers physical mounting and electrical setup, including network topology and bus connections.
Guides through pre-operation checks, master setup, DIP switch configuration, and first power-up.
Details how process data is transferred and mapped using PDOs.
Explains parameter addressing, DRIVECOM (DP-V0), and PROFIdrive (DP-V1) channels and error codes.
Covers monitoring of communication status, interruptions, and software configuration.
Explains how to use LEDs, software, and bus status for diagnostics.
Provides a comprehensive list of PROFIBUS error messages, their causes, and remedies.
Lists and describes communication-relevant parameters and PROFIdrive objects.
Reference table for setting the PROFIBUS station address using DIP switches.
To Next Page
