Safety instructions
General safety and application notes
2
15
EDBCSXE040 EN 6.0
Maintenance and servicing
The power supply modules do not require any maintenance if the prescribed operating
conditions are observed.
If the ambient air is polluted, the cooling surfaces of the power supply module may become
dirty or the ventilation slots may be obstructed. Therefore, clean the cooling surfaces and
ventilation slots periodically under these operating conditions. Do not use sharp or pointed
tools for this purpose!
Disposal
Recycle metal and plastic materials. Ensure professional disposal of assembled PCBs.
The product−specific safety and application notes given in these instructions must be
observed!
To Next Page
Loading...