Lenze ECSEE040 - Commissioning Steps (Overview)

Commissioning
Commissioning steps (overview)
6

56
EDBCSXE040 EN 6.0
6.1 Commissioning steps (overview)
Start
Make basic
settings
( 57)
Operation via system bus (CAN) with
higher−level master
( 59)
Control via digital inputs
( 60)
Configure system bus (CAN)
Digital inputs
Set X6/DI1, DI2 = HIGH
Digital inputs
Set X6/DI1, DI2 = HIGH
Specify control word
Spec
if
y contro
l
wor
d
Configure monitoring
functions
( 109)
l Save parameters in the power supply
module with C0003 = 1.
l Save parameter set with GDC in the
parameter set file.
Switch on the mains
End