Lenze g500-S Series - Information on project planning; Safety instructions

Storage
Storage up to one year:
•
Observe the climac condions according to the technical data
-
4Environmental condions ^ 65
•
Store in a dry, low-vibraon environment (V
e
< 0.2 mm/s) without aggressive atmosphere
in the interior
•
Protect from dust, shocks and sunlight
•
Avoid temperature changes with condensate formaon.
•
Store gearboxes with a venlaon unit with the venlaon element on top.
•
Do not acvate venlaon unit, in order to prevent air exchange with the ambient air.
•
Treat damaged corrosion protecon on shas and bare surfaces subsequently
Storage for more than one year, up to two years:
•
Apply a long−term corrosion prevenve (e.g. Ancorit BW 366 from the Fuchs company) to
the shas and uncoated surfaces before storing the motor away.
•
Do not acvate venlaon element
•
Install gearbox in mounng posion M1 (A)
•
Fill gearbox with the lubricant type lled in (see nameplate) up to the lling/venng bore
for mounng posion M1 (A)
-
4Nameplates ^ 12
-
4Venlaon ^ 23
Storage
18