Lenze g500-S Series - Application as Directed; Foreseeable Misuse

Applicaon as directed
•
The product must only be actuated under the operang condions and power limits
specied in this documentaon.
•
The product meets the protecon requirements of 2014/35/EU: Low-Voltage Direcve.
•
The product is not classed as a machine under 2006/42/EU: Machinery Direcve.
•
No machine is to be commissioned or put into operaon as intended in conjuncon with
the product unl it has been determined that the machine meets the regulaons of EC
Direcve 2006/42/EU: Machinery Direcve; observe EN 60204−1.
•
Commissioning or pung into operaon as intended is only permied in compliance with
the EMC Direcve 2014/30/EU.
•
The product is not a household appliance. Instead, it is a component that is intended
exclusively for further use in the context of commercial or professional use as dened by
EN 61000−3−2.
•
The product can be used according to the technical data if the drive systems have to
comply with categories in accordance with EN 61800−3.
•
Do not use the built-in brakes as fail-safe brakes. Disrupve factors that cannot be
inuenced may cause the braking torque to be reduced.
•
The product may be operated with or without an inverter.
•
The harmonized standards of the series IEC/EN60034 are used.
Foreseeable misuse
•
Use in potenally explosive areas
•
Use in agressive environments
•
Use under water
•
Use under radiaon
•
Use in generator mode
Safety instrucons
Applicaon as directed
9