Lenze g500-S Series - Connection Via HAN Connector

Connecon via HAN connector
The power, brake and temperature monitoring can be connected in the HAN connector.
The designs HAN 10E or HAN modular with two power modules (16 A or 40 A) are available.
The HAN 10E connector is only available for motors with the connecon method
Y/Δ.
An addional recer can be connected with HAN modular.
Posion of the connecons
1
Note Meaning
1 Power connecon
Brake connecon
PE connecon
Connecon of temperature monitoring
Addionally for HAN-Modular:
•
Recer connecon
HAN 10E connector
The motor connecon is specied in the counter plug.
The connector is only suitable for motors with the connecon method Y/Δ.
Bridge arrangement in the mang connector HAN 10E
Contact Name Meaning
6-7-8 y Circuit
1-6
2-7
3-8
Δ
HAN 10E pin assignment
Contact Meaning Illustraon
1 U1 Motor winding phase
1
2
3
4
5
6
7
8 9
10
2 V1
3 W1
4 +/AC Brake
5 -/AC
6 W2 Motor winding phase
7 U2
8 V2
9 TCO/+PT1000 Temperature monitoring
10 TCO/-PT1000
HAN modular connector
The motor connecon is specied in the terminal box.
Electrical installaon
Motor connecon
Connecon via HAN connector
45