Maintenance
WARNING!
Risk of injury due to non-compliance with the following safety measures
Disregarding the following safety measures may lead to severe personal injury and damage to
property.
▶
Only work on the drive system when it is de-energised.
▶
Wait for the surfaces to cool down.
▶
Put the drive system in a load-free state or secure any loads acng on the drive.
▶
Protect the motors against the ingress of foreign bodies.
Feedback
DANGER!
Any work on the safety encoder which has not been executed professionally will cause a loss
of the safety funcons.
Possible consequences: damage to property and/or injury to persons.
▶
The safety encoder may only be repaired or replaced by the Lenze service or its authorised
persons.
Maintenance
49
To Next Page
Loading...
