Lenze g500-S Series - Technical Data; Standards and Operating Conditions; Conformities and Approvals; Protection of Persons and Device Protection

Technical data
Standards and operang condions
Conformies and approvals
Conformies
CE
2009/125/EC ErP Direcve and associated regulaons on the ecodesign of electric motors
2011/65/EU RoHS Direcve
2006/42/EC Machinery Direcve, only relevant for (permissible) safety components, such as encoder or brake
2014/35/EU Low-Voltage Direcve
2014/30/EU EMC Direcve (reference: CE-typical drive system)
EAC
TP TR 004/2011 Eurasian conformity: Safety of low voltage equipment
TP TC 020/2011 Eurasian conformity: Electromagnec compability of technical means
Approvals
cULus
e-CFR 431
Energy Eciency Program for Certain Commercial and Industrial Equipment - does not apply to
8400 motec
CSA C390 Energy Eciency Test Methods for Three-Phase Inducon Motors - does not apply to 8400 motec
UL 1004-1 UL Standard for Rotang Electrical Machines - does not apply to 8400 motec
UL 1004-8 UL Standard for Inverter Duty Motors - does not apply to 8400 motec
CSA 22.1 No. 100 CSA Standard for motors and generators - does not apply to 8400 motec
CUR
UL 1004-1 UL Standard for Rotang Electrical Machines - only applies to 8400 motec
UL 1004-8 UL Standard for Inverter Duty Motors - only applies to 8400 motec
CSA 22.1 No. 100 CSA Standard for motors and generators - only applies to 8400 motec
GB
GB 12350 GB Standard: Safety requirements of small-power motors
GB 18613
GB Standard: Minimum allowable values of energy eciency and energy eciency grades for
small and medium three-phase asynchronous motors - does not apply to 8400 motec
GB/T 26572
GB Standard: Requirements on concentraon limits for certain restricted substances in electrical
and electronic products
Protecon of persons and device protecon
Degree of protecon
EN
EN 60529, EN
60034-5
IP54
Informaon applies to the mounted and ready-
for-use state
IP55
IP65
IP66
Temperature class
Ulizaon
EN 60034-1
B (130 °C) Ulizaon
Insulaon system F (155 °C) Insulaon system
Permissible voltage
IVIC C IEC 60034-18-41 at 500 V
EMC data
Noise emission
Fulls requirements
according to
EN 60034-1 A nal overall assessment of the drive system is indispensable
Noise immunity
- EN 60034-1 Requirements met
A nal overall assessment of the drive system is
indispensable
Technical data
Standards and operang condions
Conformies and approvals
64