Lenze g500-S Series - Lubricants and ventilation

Product extensions
Mounng instrucons for shrink disc cover
NOTICE
▶
The loosely enclosed cover is mounted as a protecon against accidental contact with the
shrink disc.
Gearboxes G50BS113 ... G50BS195
X
X
Press the cover with integrated mounng pins into the bore holes on the housing ange
Gearboxes G50BS221 ... G50BS245
X
1
2
3
X
1 Shrink disc cover
2 Cheese head screw
3 Reducing bush
1.
Screw reducing bushes (3) into the threaded holes on the housing ange so that they are
ush using a screwdriver.
2.
Fasten the cover over the reducing bushes (3) using cheese head screws (2).
Mechanical installaon
Mounng
Product extensions
32