Need help?Do you have a question about the Lenze i550 and is the answer not in the manual?
Overview of the inverter's physical components and connections.
Specifies the intended use and limitations of the product.
Lists relevant safety and technical standards the product adheres to.
Outlines operator responsibilities regarding standards and directives.
Details requirements for safe and compliant product commissioning.
Information on the PROFINET firmware and its licensing.
Explains how to identify different product variants and their coding.
Defines the use of decimal separators in the documentation.
Explains the meaning and importance of safety instruction symbols and levels.
Essential safety precautions to prevent injury and damage.
Identifies hazards that remain after safety measures are applied.
Specifies approvals, standards, and environmental operating conditions.
Crucial considerations before and during mechanical installation.
Instructions for attaching the shield connection sheet to the mounting plate.
Provides dimensional data and assembly requirements for the inverters.
Specific preparation steps for connecting to an IT system.
Illustrates exemplary wiring for all voltage and power classes.
Guidelines for ensuring electromagnetic compatibility during installation.
Technical data and fusing for 1-phase, 120V connections.
Technical data and fusing for 1-phase, 230/240V connections.
Technical data and fusing for 3-phase, 230/240V connections.
Technical data and fusing for 3-phase, 400V connections.
Technical data and fusing for 3-phase, 400V connections.
Technical data and fusing for 3-phase, 480V connections.
Technical data and fusing for 3-phase, 480V connections.
Instructions and recommendations for connecting a brake resistor.
Details on the function and connection of control terminals.
Information on the relay output terminals and their specifications.
Details on the PTC input for motor temperature monitoring.
Configuration for various network communication protocols.
Critical safety information and requirements for functional safety.
Explanation and implementation of the Safe Torque Off (STO) function.
Steps for the first-time power-up and initial checks.
Key considerations and warnings during the commissioning process.
Explains the operation of the keypad and its keys for parameter control.
How to activate and use keypad control for motor operations.
A streamlined process for commissioning using terminal controls.
Detailed wiring and parameter configuration for terminal control.
Overview of key parameters and their grouping for efficient setup.
Commonly used parameters configurable as favorites for quick access.
Essential parameters for basic configuration and operation.
Parameters related to motor identification, calibration, and data.
Parameters for loading default settings and saving user data.
How to interpret and display error messages on the keypad.
A comprehensive list of error codes, their descriptions, classifications, and remedies.
Explains the meaning of the status LEDs for the inverter.
Information on how to obtain further support and product details.
To Next Page
General
