Lenze i550 - Key Parameters Overview

Operating instructions i550 cabinet frequency inverter | 34
© 11/2021 · EN · www.Lenze.com
The most important parameters at a glance
This chapter contains the most important parameters and selections.
You can nd a detailed description in the commissioning document:
www.lenze.com/product-information
The parameters are divided into the following function groups:
• Pxxx.xx group 0: Favorites
• P1xx.xx group 1: Diagnostics
• P2xx.xx group 2: Basic setting
• P3xx.xx group 3: Motor control
• P4xx.xx group 4: I/O setting
• P5xx.xx group 5: Network setting
• P6xx.xx group 6: Process controller
• P7xx.xx group 7: Additional functions
• P8xx.xx group 8: Sequencer
Favorites (group 0)
Group 0 contains the congurable favorites that are also contained in the groups 1 to 4. In the
default setting these are the most common parameters for the solution of typical applications.
Commissioning









Parameter overviewTerminal controlKeypad controlImportant notesInitial switch-on
Extended
terminal control
Keypad module
Additional functions
Basic setting Motor control
Favorites