Lenze i550

Operating instructions i550 cabinet frequency inverter | 29
© 11/2021 · EN · www.Lenze.com
Important notes
DANGER!
Unexpected and dangerous motor movements and system movements
Incorrect settings during commissioning may cause unexpected and dangerous motor and
system movements.
Possible consequences: Death, severe injuries, or damage to property
• Clear hazardous area.
• Observe safety instructions and safety clearances.
The following plug-on modules are available as accessories for the inverter:
• Keypad module
• WLAN module
• USB module
Keypad module
Commissioning with the keypad module is described on the following pages.
WLAN module
A connection to the WLAN module is established upon entering the connection data.
Default setting:
• IP address: 192.168.178.1
• SSID: “Product type”_“10-digit identication”
• WLAN password: password
Engineering Tool »EASY Starter«
Commissioning and diagnostics can be carried out with the »EASY Starter« engineering tool.
For communication, a USB module on the inverter and a standard USB cable (A plug to micro
B plug) is required.
SMART Keypad App
The Lenze SMART Keypad App for Android or iOS allows you to diagnose and parameterize an
inverter. A WLAN module on the inverter is required for communication.
• Ideal for the parameterization of simple applications suchas a conveyor belt.
• Ideal for the diagnostics of the inverter.
The app can be found in the Google Play Store or in the Apple App Store.
Android iOS
Commissioning









Parameter overviewTerminal controlKeypad controlImportant notesInitial switch-on
Extended
terminal control
Keypad module
Additional functions
Basic setting Motor control
Favorites