Technical data
General data and operating conditions
4
18
Lenze ¯ BA 33.0005 ¯ 5.0
4 Technical data
4.1 General data and operating conditions
General data
Conformity declarations and approvals
Conformity declarations
CE
2006/42/EC Machinery Directive
2014/35/EU Low−Voltage Directive
2009/125/EC ErP Directive
EAC
TP TC 004/2011
(TR CU 004/2011)
On safety of low voltage
equipment
Eurasian Conformity
TR CU: Technical Regulation of
Customs Union
TP TC 020/2011
(TR CU 020/2011)
Electromagnetic
compatibility of technical
means
Eurasian Conformity
TR CU: Technical Regulation of
Customs Union
Approvals
UL UL 1004−8 File No. E210321 Inverter Duty Motors
Motors and Generators
CSA CSA C22.2 No. 100
Energy Verified CFR Part 431.23 File No. E210321
CC1278B
Energy Efficiency Program for
Certain Commercial and
Industrial Equipment
CSA C390−10 Energy Efficiency Test
Methods for Three−Phase
Induction Motors
CCC GB Standard
12350−2009
Safety requirements of small−power motors
The applicable approvals for the product you have ordered require labelling and are
specified on the nameplate.
Protection of persons and devices
Enclosure IEC/EN 60034−5
See nameplate
Degrees of protection only apply to horizontal installation
All unused connectors must be closed with protection
covers or blanking plugs.
Temperature class F (155 °C)
IEC/EN 60034−1
Exceedance of the temperature limit weakens or destroys
the insulation
Permissible voltage As specified by limiting curve A of the pulse voltage from
IEC / TS 60034−25:2007 (corresponds to IVIC
C/B/B@500V)
EMC
Noise emission
IEC/EN 61800−3 Depending on the controller, see documentation for the
controller.
Noise immunity
To Next Page
Loading...
Need help?
General
