What does 'HI TEMP' mean on my Lenze AC Tech M3103S Controller?
The 'HI TEMP' error on your Lenze Controller suggests that the ambient temperature is too high or there is a fan failure, if a fan is installed.
Why does my Lenze AC Tech M3103S show 'HI VOLTS'?
The 'HI VOLTS' error on your Lenze Controller is triggered by high line voltage, an overhauling load, or a deceleration rate that is set too fast.
What does 'PWR SAG' mean on Lenze AC Tech M3103S and how to fix it?
The 'PWR SAG' error on your Lenze Controller can appear due to erratic AC line or if a new control board has been installed that is different from the previous version. To fix this, perform a factory reset using Parameter 65-PROGRAM. This will update the software and allow the fault to be reset.
Why does my Lenze Controller display 'LO VOLTS'?
The 'LO VOLTS' error on your Lenze Controller is caused by low line voltage.
What does 'PWR TRAN' mean on my Lenze AC Tech M3103S Controller?
The 'PWR TRAN' error on your Lenze Controller indicates that the AC line dipped or sagged.
General| Brand | Lenze |
|---|---|
| Model | AC Tech M3103S |
| Category | Controller |
| Language | English |
To Next Page
