Lenze SM302 - Page 27

Safety engineering
Device modules
Mission time
1

27
EDS94AYAF EN 1.0
1.2.4.3 EC Declaration of Conformity
eulep...2354660
Fig. 1−4 EC Declaration of Conformity
The EC type examination was carried out by ’TÜV Rheinland (Group)’ and confirmed with
a certificate.
ƒ SM302 V1.0
Contents Specifications
Test institute TÜV Rheinland Industrie Service GmbH, A−FS range
Test report 968/FSP 1323.00/16
Test fundamentals EN 60204−1, EN 61800−3, EN 61508 Part 1−7, EN ISO 13849−1, EN 62061,
EN 61800−5−2, EN 61800−5−1
Object to be examined SM302, type E94AYAF of the Servo Drives 9400 series
Test result The module meets the requirements according to
l EN 61508, SIL 3
l EN ISO 13849−1, category 4/PL e
Special conditions The safety instructions in the corresponding user documentation must be
observed.
Place of issue Cologne
Issue date 11.10.2016