Lenze Smart Motor m300-E - Environmental Conditions

Environmental c
ondions
Surface and corrosion protecon (called OKS)
Depending on the ambient condions, the surface and corrosion protecon system (called
OKS) oers tailor-made soluons for opmum protecon.
Various surface coangs ensure that the motors operate reliably even at high air humidity, in
outdoor installaon or in the presence of atmospheric impuries. Any colour from the "RAL
Classic" collecon can be chosen for the top coat.
For the indoor installaon and if no special corrosion protecon is required, the products are
also available unpainted (without OKS).
Without OKS (unpainted):
The aluminium parts ar
e not coated and grey cast iron parts are primed with
grey paint. Slight colour dierences of the components are possible.
Surface and corrosion
pr
otecon
Applicaons Product
g500-H45 ... H450
g500-S130 ... S660
g500-B45 ... B450
g500-H600 ... H1500
g500-S950 ... S4500
g500-B600 ... B1500
without OKS (unpainted)
•
Indoor ins
tallaon, no special corrosion
protecon necessary
•
Painng by customer
Standard
OKS-G (primed)
•
Dependent on subsequent top coat applied Oponal Oponal
OKS-S (small)
•
Standard applicaons
•
Internal installaon in heated buildings
•
Air humidity up to 90%
Standard
OKS-M (medium)
•
Internal installaon in non-heated buildings
•
Covered, protected external installaon
•
Air humidity up to 95 %
Oponal
Surface and corrosion
protecon (called OKS)
Corrosivity category Surface coang Colour Coang thickness
DIN EN ISO 12944-2 Design
without OKS (unpainted)
OKS-G (primed)
•
2K PUR priming c
oat 60 ... 90 µm
OKS-S (small) Comparable to C1
•
2K-PUR top coat
•
Standard: RAL 7012
•
Oponal: RAL Classic
80 ... 120 µm
OKS-M (medium) Comparable to C2
•
2K PUR priming coat
•
2K-PUR top coat
110 ... 160 µm
Informaon on pr
oject planning
Final conguraon
Environmental condions
27