Lenze Smart Motor m300-E - Product Extensions; Torque Plates

Product extensions
T
orque plates
The torque support is usually eected by means of the foot or ange. The torque plates that
can be ed are another possibility. In this case, the torque support is provided only via one
point and is suitable for sha-mounted gearboxes, among other things. Supplied rubber
buers ensure a stress-free installaon and absorb slight impacts.
The torque plates are available in two versions, for being installed at the exisng threaded
pitch circle or for the foot at the gearbox.
In addion, torque support for the g500-B45 gearbox can be eected via the holding xture of
the housing which is integrated on both sides.
Types
Torque plate on threaded pitch circle
Can be moun
ted on both sides
Torque plate on housing foot
Only available for g500-B45 gearbox
Rubber bu
er for integrated torque support
Can be mounted on both sides
Product extensions
78