Lenze Smart Motor m300-E - Information on electrical installation

Informaon on electric
al installaon
Important notes
DANGER!
Hazardous voltage!
On the po
wer connecons even when disconnected from the mains: residual voltage >60 V!
▶
Disconnect the product from the mains and wait unl the motor is at a standsll.
▶
Make sure that the product is safely isolated from supply!
•
When w
orking on energised products, comply with the applicable naonal accident
prevenon regulaons.
•
Carry out the electrical installaon in compliance with the relevant regulaons (e.g. cable
cross-secons, fuses, PE connecon).
•
The manufacturer of the system or machine is responsible for adherence to the limits
required in connecon with EMC legislaon.
Preparaon
The notes for the electrical c
onnecon can be found in the enclosed connecon
diagram of the drive.
Informaon on electric
al installaon
Preparaon
37