A. Filling the Water Tank
1. To fill the water tank, you can either use a jug to pour water into it or
remove the tank from the unit to fill it under a tap.
Note: If you choose to remove the tank, ensure you replace it securely
afterwards.
2. Fill the tank with the desired amount of water, making sure the water
level is between the "MIN" and "MAX" indicators on the tank.
Note: Do not use warm or hot water to fill the water reservoir.
B. Filling the Milk Tank
1. If you intend to prepare a cappuccino or latte, first remove the milk tank
from the unit.
2. Open the lid, then pour the estimated amount of cold milk needed,
ensuring the level is between the "MIN" and "MAX" indicators.
3. After filling, securely replace the milk tank in the unit.
Note: You may use any type of milk you prefer, such as whole milk, low-
fat milk, organic milk, or soy milk.
Important Note: Avoid using sugar-roasted ground coffee or sugar-roasted
coffee beans as they can cause filter clogging and damage to the appliance.
In the event of accidental use, discontinue operation and seek maintenance
at the nearest service center. Periodic descaling is recommended to
maintain the appliance's performance. Please contact our service centers
for further information on this procedure.
3. Securely close the water reservoir lid and ensure it is properly repositioned
on the unit.
9
Filling the Device
To Next Page