a. Ensure that the unit is properly plugged in.
b. Turn the unit on by selecting the "I" setting.
c. The six control panel lights will begin blinking as the unit heats up and
will remain so until the water reaches the ideal temperature.
d. Once all six lights are solid, the unit is ready for use.
12
Placing the Cup
Powering ON
Sleep Mode
a. If using a small cup for brewing espresso, pull
out the drip tray bracket.
b. If brewing cappuccino with a larger cup, retain
the drip tray bracket within its compartment.
c. Similarly, keep the drip tray bracket inside its
compartment when brewing latte with a larger cup.
Caution: When brewing cappuccino or latte, ensure
proper adjustment of the frothing tube lever to position the milk dispensing
tube inside the cup. Additionally, adjust the length of the frothed milk
dispensing tube by locking it into different positions on the frothing tube
lever to accommodate various cup sizes. Clean the frothing tube by rotating
it out and fixing it securely.
If there is no activity within 15 minutes, the unit will enter sleep mode. You
can awaken the unit by pressing any button.
To Next Page
Loading...