C. Choose the Filter
Select the appropriate filter for use as follows:
1. For a Single Shot: Use the filter designated for
a single shot of espresso if using ground coffee.
2. For a Double Shot: Use the filter designated
for a double shot of espresso.
Note: The pod filter included with your unit is specifically designed to work
only with the pods recommended for your model.
10
Filter Insertion
Coffee Filling Procedure
1. When inserting the chosen filter into the
pressurized funnel assembly, ensure proper
alignment by matching the notch on the filter
with the groove inside the pressurized funnel assembly.
2. Rotate the filter either left or right to engage
the locking mechanism, ensuring a secure fit
within the pressurized funnel assembly.
Note: To remove and clean the filter, rotate it to the left or right until the
filter notch aligns with the groove inside the pressurized funnel assembly.
Warning: Exercise caution and allow the filter to cool before attempting
removal. Ensure safety precautions are followed at all times.
Position the chosen filter onto the pressurized funnel assembly according
to the following steps:
1
2
To Next Page