1. For Ground Coffee
a. Fill the filter with fresh, finely ground espresso coffee, ensuring not to
overfill.
Note: The amount of ground coffee must not exceed the MAX mark.
b. Tamp down and evenly compress the coffee grounds firmly.
c. Remove any excess coffee from the rim to ensure a proper fit under
the brew head.
a. Place the pressurized funnel assembly under the brew head and attach
it by first moving the retainer clip backward.
b. Align the handle with the open lock icon “ ” on the unit and insert it
into the groove.
c. Slowly rotate the handle to the right until the retention clip aligns with
the closed lock symbol “ ” on the unit.
Note: Exercise caution as the frothing tube may be very hot.
11
Placing the Funnel
To Next Page
Loading...