Fel! Använd fliken Start om du vill tillämpa 見出し 1 för texten som ska visas här.
4
In order to prevent problems with the machine, follow the precautions
below.
1. This machine and AC adopter are
precision products. Handle them
carefully, and do not drop them or allow
them to receive any shock or impact.
2. For the consumables other than the
tubes (tape cassette, ink ribbon case,
cutter, etc), use the specified products
only. Never use other products.
3. When printing characters on the tubes,
do not use the tubes that has been bent,
crushed or badly stained. Especially,
hard dirt or foreign material attached to
the tubes may cause trouble of the
printer head.
4. Do not clog the exit of the tapes and
tubes. Do not insert things in it. Do not
pull the tapes or tubes when it is being
printed.
5. Do not lift up the machine having its
cassette cover. The machine may fall.
6. If there is strong external noise or shock
applied to the machine during operation,
abnormal displays may appear or
contents of the memory may be erased.
7. Do not pull out the power cord while the
power key of the main body is turned on
or right after it is turned off, which may
cause malfunction or trouble such as
loss of contents of the setting or memory.
8. If tube is jammed, do not pull the tube by
hand. Remove the jammed tube with
using the “FEED” function. (page 14)
To Next Page
Loading...
Need help?
General
