Letatwin LM390 User Manual

Fel! Använd fliken Start om du vill tillämpa 見出し 1 för texten som ska visas här.
63
1. Connect the LM-390A/PC with a personal computer with USB cable.
2. Press OPTION .
The [PC connection / OPTION setting screen]
appears.
3. Press ▲/▼ key to select “DATA FILE TRANSFER
FROM PC”.
4. Press ENTER.
5. The following message is displayed, which shows the
machine is ready to receive data from PC.
6. Operate “TRANSFER DATA ” on the “LETATWIN PC EDITOR”. Select the file no. to save
the data. SETTING RANGE : 0~50.
When “0” is selected, the data is loaded into the “INPUT SCREEN”.
When “1~50” are selected, the data is saved into the “INTERNAL MEMORY”.
(SEE 6-15: INTERNAL MEMORY)
Note: The existing data on the “INPUT SCREEN” or in the “INTERNAL MEMORY” is
overwritten.
Note: How to use “LETATWIN PC EDITOR”
Please see the “HELP” menu of “LETATWIN PC EDITOR” after installing it.
The instruction manual is included in the “HELP” menu.
Ｄ Ａ Ｔ Ａ Ｆ Ｉ Ｌ Ｅ Ｔ Ｒ Ａ Ｎ Ｓ Ｆ Ｅ Ｒ
Ｆ Ｒ Ｏ Ｍ Ｐ Ｃ
Ｄ Ｉ Ｒ Ｅ Ｃ Ｔ Ｐ Ｒ Ｉ Ｎ Ｔ Ｉ Ｎ Ｇ
Ｆ Ｒ Ｏ Ｍ Ｐ Ｃ
Ｏ Ｐ Ｔ Ｉ Ｏ Ｎ
Ｄ Ａ Ｔ Ａ Ｆ Ｉ Ｌ Ｅ Ｔ Ｒ Ａ Ｎ Ｓ Ｆ Ｅ Ｒ
Ｆ Ｒ Ｏ Ｍ Ｐ Ｃ
Ｄ Ｉ Ｒ Ｅ Ｃ Ｔ Ｐ Ｒ Ｉ Ｎ Ｔ Ｉ Ｎ Ｇ
Ｆ Ｒ Ｏ Ｍ Ｐ Ｃ
Ｏ Ｐ Ｔ Ｉ Ｏ Ｎ
［ Ｐ Ｃ Ｃ Ｏ Ｎ Ｎ Ｅ Ｃ Ｔ Ｉ Ｏ Ｎ ］
Ｒ Ｅ Ａ Ｄ Ｙ Ｔ Ｏ Ｒ Ｅ Ｃ Ｅ Ｉ Ｖ Ｅ
Ｄ Ａ Ｔ Ａ

Letatwin LM390 Specifications

General

Brand	Letatwin
Model	LM390
Category	Printer
Language	English