Leuze electronic BCL 8 Series - Mounting; Figure 6.2: BCL 8 Mounting Example

Installation
30 BCL 8 Leuze electronic
6.2 Mounting
Attention Laser Radiation!
Follow the safety notices in chapter 2.3 on page 6!
Accessories
A variety of mounting systems are available which you can order separately from Leuze
electronic. Please select the
part number from the separate data sheet (available on the
Internet under Leuze website).
Mounting the BCL 8
There are three basic mounting arrangements for the BCL 8:
• using the dovetail strips and the corresponding mounting accessories
• using the mounting threads on the back- and underside of the devices (chapter 4.3)
• using the two ∅ 4.4mm through holes (chapter 4.3)
BCL 8 mounting example
Figure 6.2: BCL 8 mounting example
Mounting the MA 8.1 connector unit
You can mount the MA 8.1 connector unit according to your needs by using the two bore
holes. Subsequently, connect the BCL 8 with the connector unit via the respective cable
(see separate data sheet for MA 8.1).
Rod mounting with UMS 8.1-D…
mounting system
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com