Important parameters
Leuze electronic BCL 8 53
TNT 35/7-24V
10.8 Switch tab
Figure 10.11: Switch tab
Attention!
Depending on wiring, either a switching input or a switching output is available on the BCL 8.
By using an MA 8.1 or MA 8-01 connector unit, switching input and switching output can be
used simultaneously,
Activation Select the desired event which is to initiate the switching of the switch-
ing output here. Multiple events can also be simultaneously activated.
Deactivation Shown here is the event that results in the switching output being
reset. (If the set pulse duration has not yet expired.) Multiple events
can also be simultaneously activated.
Invert Level inverted
Pulse duration Duration of the switching output impulse.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
To Next Page
Loading...
