Leuze electronic KRTM 3B Series User Manual

Leuze electronic GmbH + Co. KG In der Braike 1 D-73277 Owen Tel. +49 (0) 7021 573-0
info@leuze.com • www.leuze.com
We reserve the right to make changes • DS_KRTM3B_en_50110625_05.fm
 RGB transmitter
 Various teach variants
 Short response time
 Switching threshold adjustment via EasyTune
 Level adaptation for glossy objects
 Keyboard lockout
 Remote teach via cable
 20ms pulse stretching
14.5mm
10 kHz
10 - 30 V
DC
Accessories:
(available separately)
 Mounting systems (BT 3…)
 Cable with M8 or M12 connector (K-D …)
U
L
US
C
LISTED
IEC 60947...
IEC 60947...
IP 67
Dimensioned drawing
A Green indicator diode
B Yellow indicator diode
C Light spot orientation horizontal
D Light spot orientation vertical
E Transmitter
F Receiver
G Optical axis
H Teach button
J Mounting sleeve
Electrical connection
Connector, 4-pin
KRTM 3B/L6.1121-S8
KRTM 3B Multicolor contrast scanner
KRTM 3B… - 08
en 08-2016/11 50110625-05

Leuze electronic KRTM 3B Series Specifications

General

Brand	Leuze electronic
Model	KRTM 3B Series
Category	Accessories
Language	English

Summary

Electrical connection

Connector, 4-pin

Details the 4-pin connector for electrical connections.

Specifications

Optical data

Covers scanning range, light spot dimensions, and orientation.

Sensor operating modes

Describes IO-Link and SIO operating modes.

Timing of the sensor

Details internal switching frequency, response time, and jitter.

Timing of the outputs

Electrical data

Mechanical data

Environmental data

Options

Remarks

UL Requirements

Intended Use and Safety

Emphasizes safe operation and personnel protection guidelines.

IO-Link process data

Static 2-point teach

Dynamic 2-point teach

Switching threshold in center

Switching threshold near the mark

Static 1-point teach

Standard sensitivity

High sensitivity

Pulse stretching option

Switching pulse stretching on or off

"EasyTune" option - fine tuning of the switching threshold

Increasing the switching threshold

Details how to increase the switching threshold using the teach button.

Reducing the switching threshold

Details how to reduce the switching threshold using the teach button.

Sensor adjustments via the input IN (Pin 2, not for KRTM 3B/L6...)

Switching threshold in center / standard sensitivity

Switching threshold near the mark / high sensitivity

Pulse stretching ON

Pulse stretching OFF

Locking the teach button via the input IN (Pin 2, not for KRTM 3B/L6...)