Need help?Do you have a question about the Leuze electronic DDLS 200 Series and is the answer not in the manual?
General| Brand | Leuze electronic |
|---|---|
| Model | DDLS 200 Series |
| Category | Accessories |
| Language | English |
Explains warning symbols and notes used in the technical description.
States compliance with European standards and ISO 9001 quality assurance.
Introduces the DDLS 200 series as high-performance optical data transmission systems.
Explains the use of two frequency pairs for duplex operation to prevent interference.
Covers safety standards compliance, intended use, and application areas for the DDLS 200.
Details safety regulations, qualified personnel requirements, and documentation.
Lists electrical, optical, and mechanical specifications, including operating range and protection.
Provides physical dimensions, connection details, and cable specifications for the DDLS 200.
Guides on how to mount devices, ensure alignment, and avoid transmission interruptions.
Provides measures to prevent mutual interference between adjacent transmission systems.
Explains how to connect multiple DDLS 200 systems in series for extended data paths.
Details electrical connections for supply voltage, inputs, outputs, and bus systems.
Describes PROFIBUS electrical connections using screwed cable glands and terminals.
Details PROFIBUS electrical connections using M12 connectors.
Covers settings for termination, baud rate, and mode switching for PROFIBUS.
Explains the meaning of status LEDs for PROFIBUS models.
Details the electrical connection for INTERBUS 500kBit/s using terminals.
Covers configuration of incoming/outgoing bus and shielding connection for INTERBUS.
Explains the status LEDs for INTERBUS 500kBit/s / RS 422 models.
Describes the fiber-optic (FOC) connection for INTERBUS 2MBit/s using FSMA connectors.
Covers transmission rate and incoming/outgoing bus configuration for INTERBUS FOC.
Explains the status LEDs for INTERBUS 2MBit/s FOC models.
Details the electrical connection for Data Highway + and Remote I/O buses.
Covers cascading, filter settings, and transmission rate adjustments for DH+/RIO.
Explains the status LEDs for Data Highway + / Remote I/O models.
Details wired connections for DeviceNet/CANopen, including transceiver power options.
Describes electrical connections for DeviceNet/CANopen using M12 connectors.
Covers baud rate conversion, sorting, and bus length settings for DeviceNet/CANopen.
Explains DeviceNet/CANopen wiring principles and bus termination requirements.
Explains the status LEDs for DeviceNet/CANopen models.
Describes system response to interruptions and participant monitoring mechanisms.
Provides notes on segmentation, time behavior, synchronous messages, and implementation.
Details Ethernet connection using RJ45 socket, including switch settings for autonegotiation.
Describes Ethernet electrical connections using M12 connectors.
Covers autonegotiation, transmission rate conversion, and network expansion for Ethernet.
Explains Ethernet wiring, distinction between 1:1 and crossover cables, and RJ45/M12 assignments.
Explains the status LEDs for Ethernet models.
Provides notes on bus configuration, receive buffers, and primary transmission protocols.
Describes the bar graph, operating mode LEDs (AUT, MAN, ADJ), and operating mode button.
Provides an overview of operating modes: Automatic, Manual, and Adjust.
Details the self-test, LED status checks, and the procedure for fine alignment.
Covers maintenance-free operation, cleaning requirements, and response to beam interruption.
Provides instructions for cleaning the optical window using a soft cloth and glass cleaner.
Explains how device LEDs indicate faults and errors across different models.
Details how to enter and use diagnostic mode for monitoring received signal levels.
Lists common faults, possible causes, and remedies for device operation issues.
Lists M12 terminating resistors for PROFIBUS and DeviceNet/CANopen BUS OUT.
Lists M12 connector sockets and pins for PROFIBUS and voltage supply.
Provides contact assignment, technical data, and order codes for PWR connection cables.
Lists cables for PROFIBUS and Industrial Ethernet, including technical data and order codes.
To Next Page
