17
From here, click on the System icon to arrive at the following page. On this Page you can make entries
to the Name, Description, and Location fields as well as set the device’s time.
System Information Page
There are two methods of setting up the time: Manual (indicated by the option Set Date & Time) and
NTP.
The default is Manual and requires individual setup every time the system starts up. Simply choose a
time zone and set the time accordingly. When finished, click SAVE.
Manually Time Setup
The alternative is NTP. Upon selecting NTP under the Time field, the configuration changes to allow up
to two NTP servers. Simply enter a local NTP server’s IP Address (if available) or search online for an
NTP server nearest you. Set the time zone and click SAVE.
NTP Setup
Step 2: Configuring the AP’s Network Settings
To Next Page
Loading...
