10
Then Connection between Web-Smart Switch and computer is successful
If the computer failed to connect on of Web-Smart Switch, the command window will return the
following content
Figure 3-2-2
Then make sure that your computer's network settings are correct and the cable is intact.
Caution:
YOU need to use a twisted pair to connect the port of your computer's network card to the switch port before entering
the above command
3.3 Login the device
1、Open IE browser,enter http://192.168.1.1 in the address bar, then return.
Figure 3-3-1
2、In the pop-up window to enter user name: admin, password: admin, then press the OK button.
NOTES:
If you are successful login into the switch webpage, the page from time to time
automatically refresh, allowing you to dynamically view the port status.
3.4 Functional Overview
The Web-Smart Switch have rich feature, including the functions of system management, Port Management, Redundancy
management, Security management, QoS management, Network Analysis, next chapter will introduce you these
functions.
Figure 3-4-1
To Next Page
Loading...
