32
8.4 Save Configuration
When the switch is saved configuration, the settings will be immediately applied to the switching software in RAM,
and will immediately take effect.
Choose the menu Tools→ Save Configuration to load the following page.
Figure 8-4-1
Click the save button, which can make parameters to be saved, your configuration will still work after restart.
8.5 Reset Factory Default
On this page you can reset the switch to the default. All the settings will be cleared after the switch is reset.
Choose the menu Tools→ Reset Factory Default to load the following page.
Figure 8-5-1
After the system is reset, the switch will be reset to the default and all the settings will be cleared.
To Next Page
Loading...
