5
1.2 Features
Ø Support link aggregation.
Ø Support port VLAN and IEEE 802.1Q VLAN.
Ø Support rate limit, port statistics.
Ø Support port mirroring.
Ø Support QoS, providing strict priority.
Ø Support Loop Prevention.
Ø Support MAC Address binding.
Ø Support storm control.
Ø Support the port Isolation.
Ø Support IGMP snooping, multicast probe.
Ø Support WEB-based management.
Ø Support WEB-based firmware upgrade.
Ø Support parameter backup and recovery.
Technical Specifications
The web-smart switch front panel has 8/16/24 port 10/100M adaptive UTP ports, and the LED indicator. The 8/16/24
ports support 10/100Mbps bandwidth connection device, auto-negotiation capability. Each port corresponds to a set of
indicator, LNK / ACT.
Chapter 2: Mounting Device
2.1 Installation Precautions
Ensure the surface on which the device is placed is adequately secured to prevent it from becoming unstable Ensure the
power outlet is placed within 1.8m (6feet) of the device. Ensure the device is connected safely to the power outlet with
the AC power cable. Ensure the device around good ventilation and heat dissipation.
Do not place heavy objects on the device
2.2 AC POWER
The switch can be used with AC power supply 100 to 240V AC,50 to 60Hz.. Switch built-in power supply system can be the
actual input voltage automatically adjusts its operating voltage. The power connector is located on the rear panel switch.
Disconnect the power cord is a plug on the power switch on the rear panel interface,the other end plugged into a power
outlet.
To Next Page
Loading...
