12
The System Information shows the system information of the switch, such as Device Type, MAC address, IP Address,
Hardware and Software version information.
4.3 IP Address
Figure 4-3-1
On this page you can manually set the IP address, subnet mask, gateway and other information; can also use your network,
among other DHCP SERVER switch automatically assigns an IP address. The switch default IP address is: 192.168.1.1
default subnet mask: 255.255.255.0 Default Gateway: 192.168.1.254. When finished editing, click the "Apply" to complete
the IP address settings.
Notes
：
(1)When you select "DHCP Settings" is disabled, the switch will have to manually
assign an IP address.
(2)When DHCP client is enabled, the IP parameters are obtained automatically from
the DHCP server.
4.4 User Account
This page provides the interface of configuring username and password.
Figure 4-4-1
To Next Page
Loading...
