6
Chapter3: Login The Device
You can use the web browser-based configuration to manage Web-Smart Switch. The Web-Smart Switch to be configured
through a web browser, at least a reasonable allocation of computer through an Ethernet connection to Web-Smart
Switch.
Figure 3-1
Default IP address of the switch:192.168.1.1. Subnet mask: 255.255.255.0.
When logging in the switch, make sure that the IP addresses of the host network card and the switch are in the same
network segment: 192.168.1. *** (1 <*** <255， *** is not 11). See the following setting steps：
3.1 configure the computer
The Management switch is managed via WEB pages. The smart and friendly interfaces make the switch management an
easy job. Due to the difference of Operating system, the WEB page display may differ between variable Operating System.
3.1.1 Windows 7/Windows Vista
Follow these steps to configure your computer
1、Start-Control Panel
Figure 3-1-8
To Next Page
Loading...
