17
3. Choose the menu Configuration →VLAN →802.1Q VLAN to load the following page.
Configure 802.1Q VLAN member port on this page.
Here configure port 2 as access=2, port 1,3 as trunk =2 e.g.
1). Specify the VLAN ID need to configure. Here is VLAN 2 e.g.
2). Specify the VLAN Name of VLAN 2. Here is VLAN2.
3). Select the member port of VLAN 2, and frame type supported: Untagged or Tagged. Select port 2 as Untagged. Select
port 1,3 as Tagged e.g.
Figure 5-1-5
4). Click vlan id 2 to see the detailed configuration parameters of vlan 2.
Figure 5-1-6
To Next Page
Loading...
