27
The above configuration means that mac 0000.0000.0011 is bound to port 5 and can only communicate with vlan1.
If you want the devices to be connected as planned, you can use this function. The mac can only be used on this port 5.
6.1.1.2!MA C !B lo c k in g !
If the MAC address blocking table entry is set in this switch, if the message with this MAC address whether in source MAC
or destination MAC, it will be discarded as long as the switch receives it.
Figure 6-1-3
The above configuration indicates that mac 0000.0000.0022 is blocking in vlan1.
If it is found that the attack message is sent all the time with a certain MAC address, but the port from which the MAC is
sent is unknown, you can do this.
Note: When configuring mac blocking, do not select the port number. All ports will be selected by default. E.g.
Figure 6-1-4
To Next Page
Loading...
