Page 11 of 32
User Guide
Leviton MC 7500 Series Memory Lighting Controllers
CONFIGURATION
General
The Setup function button of the LCD main menu is used to access the console configuration. All setup information is
stored in nonvolatile memory.
Stack Step Fade Page Setup
*<* 0:00.0 1
Locked:
If the console is locked, then a key code will have to be entered (6157 or 4257 or 2357)
Setup parameters are locked.
Enter keycode: 0000
THE KEY CODE IS FACTORY SET AS THE CONSOLE NUMBER IN REVERSE.
Menus:
Once Setup is selected, a series of menus can be displayed by pressing the
MORE button. To return to a previous
menu, press MAIN MENU button and re-enter the Setup mode.
Mode/Softpatch Menu
The first menu displayed allows selection of the current operating mode, current softpatch (1 or 2) and access to the
Softpatch setup. Press the Function button 4 to Select More for other menus.
Mode Patch Patch More
ScnB 1 Setup
Console Mode:
The Console Operating Mode may be selected by pressing the Mode function button until the LCD indicates the
desired mode (also indicated by the Console Mode LEDs). The available modes are
Subs (Submaster mode), ScnB
(Two-Scene mode), and
Sngl (Wide expanded channels mode).
Patch Number:
There are two softpatch tables that are stored in the MC 7500 Series nonvolatile memory. One of these may be
selected to be active by pressing the Patch function button until the desired number is shown. Changing a patch
number will result in an immediate change of the patch and may affect stage levels. The patch number shown is
also the patch that will be edited when the Patch Setup function is selected.
Patch Setup:
To edit the softpatch, first press the Patch Setup function button. This will bring up a menu of editing functions.
Edit Default Clr
Patch Patch Patch
To Next Page
Loading...
Need help?
General
