User Manual for BPS-i600
www.levitronix.com
PL-4089-00, Rev00, DCO# 21-271
9 Appendix
9.1 Regulatory Status
9.1.1 CE Marking
We herewith declare that the Centrifugal Pump System Family BPS-i600, in its various configurations, is in
conformity with the below mentioned European Directives.
Machinery Directive 2006/42/EC:
The machinery directive essentially has been followed by a risk analysis, according mitigation actions and a
user manual for safe operation. For the design and testing the following standards are used as a guideline:
Pumps for Fluids: basic requirements are followed.
Procedure for hydrostatic pressure testing in fluid pumps: used for max. pressure testing of pump head.
Safety for machinery – principles for risk assessments: used for system risk analysis.
EMC Directive 2014/30/EC:
The following standards of the EMC directive are tested and confirmed at a certified laboratory:
Generic standards, Immunity for industrial environments
Generic standards, Emission standard for industrial environments
9.1.2 Disposal of Equipment – WEEE Directive 2012/19/EU
Follow local legislation for disposal of equipment. In the European Union (EU) marked ( ) devices are
governed by the European WEEE Directive 2012/19/EU. Do not dispose with normal waste.
To Next Page
Loading...
