Levitronix BPS-200.3 - User Manual

User Manual for BPS-200
www.levitronix.com
PL-4012-00, Rev07, DCO# 20-144
First Release: 03-Oct-2008
Last Update: 09-Jul-2020
BPS-200
2.6 bar (37.7 psi)
21 liters/min (5.5 gallons/min)
USER MANUAL
This manual contains information necessary for the safe and proper use of the BPS-200. Included are specifications
for the standard configurations of the pump system and instructions regarding its use, installation, operation,
adjustment, inspection and maintenance. For special configurations of the pump system refer to accompanying
information. If the system must be configured for other parameter settings, then the Levitronix
®
Service Software
version V2.0.5.0 or higher (with according manual Levitronix

Doc.# PL-4046-00) is necessary. Familiarize yourself
with the contents of the manual to ensure the safe and effective use of this product. After reading this manual, please
store the manual where the personnel responsible for operating the pump system can readily refer to it at any time.

Summary

Safety Precautions

General Safety Warnings

Covers warnings for voltage, magnetic fields, toxic chemicals, and ATEX/IECEx motors.

Engineering Information

Power, Temperature, and Thermal Management

Covers power consumption, temperature monitoring, and thermal management.

Hydraulic Circuit Design Guidelines

Installation

Electrical Installation of Controllers

Guides electrical connections for LPC-200 controllers (standalone, extended, PLC).

Mechanical Installation

Covers mechanical mounting of pump/motor, ATEX motors, and controllers.

Operation

LPC-200.1 Stand-Alone Operation

LPC-200.2 PLC Operation

ATEX;IECEx Application Operation

Inspection and Maintenance

Impeller Replacement

Troubleshooting

Troubleshooting Procedures

Guides for troubleshooting LPC-200 controllers and using Levitronix® Service Software.

Technical Support

Contact Information

Provides contact details for Levitronix® Technical Service Department.

Levitronix BPS-200.3 Specifications

General

Flow Rate	200 l/min
Supply Voltage	24 VDC
Control Interface	RS-485
Voltage	24 VDC
Wetted Materials	EPDM
Material	PP