Levitronix PuraLev PLD-600SU.1 User Manual

User Manual for PuraLev
®
600SU
www.levitronix.com
PL-4012-00, Rev06, DCO# 20-144
First Release: 24-Sep-2013
Last Update: 09-Jul-2020
PuraLev
®
600SU
3.1 bar (45 psi)
75 liters/min (20 gallons/min)
USER MANUAL
This manual contains information necessary for the safe and proper use of the PuraLev
®
600SU. Included are
specifications for the standard configurations of the pump system and instructions regarding its use, installation,
operation, adjustment, inspection and maintenance. For special configurations of the pump system refer to
accompanying information. If the system must be configured for other parameter settings, then the Levitronix
®
Service
Software version V2.0.5.0 or higher (with according manual Levitronix

Doc.# PL-4046-00) is necessary. Familiarize
yourself with the contents of the manual to ensure the safe and effective use of this product. After reading this
manual, please store the manual where the personnel responsible for operating the pump system can readily refer to
it at any time.

Levitronix PuraLev PLD-600SU.1 Specifications

General

Flow Rate	600 l/h (158 GPH)
Power Supply	24 VDC
Weight	2.3 kg (5.1 lbs)
Sterilization	Autoclavable
Voltage	24 VDC
Pump Type	Centrifugal
Materials	PTFE
Drive	Magnetic

Summary

Safety Precautions

General Safety Warnings

Covers hazardous voltage, magnetic fields, toxic chemicals, and ATEX/IECEx safety.

Performance Curves

Power and Temperature

Thermal Management

Motor Temperature Characteristics

Controller Temperature

Controller Temperature Monitoring

Hydraulic Circuit Design

Optimal Hydraulic Circuit Design

Installation

Electrical Installation of Controller

Overview of controller interfaces for standalone and PLC operations.

General Installation Instructions

Controller Grounding and Connections

General safety, grounding, and connection instructions for controller installation.

Controller Interface Installation

Standalone & Extended Operation

PLC Interface Installation

LPC-600.2-01 PLC Connection

Mechanical Pump/Motor Installation

Pump/Motor Mounting Procedures

Describes how to mechanically install the pump and motor, including mounting positions.

ATEX/IECEx Motor Installation

ATEX/IECEx Motor Mounting Safety

Safety and mechanical installation instructions for ATEX/IECEx motors.

Controller & Cable Installation

Controller Mounting and Cable Connections

Controller mounting, Din-Rail bracket use, and correct cable connector assembly.

System Operation Modes

LPC-600.1-01 Standalone Operation States

LPC-600.1-01 Operation Modes

Button & Analog Control Modes

Explains operation using buttons or analog signals for the LPC-600.1-01.

LPC-600.1-01 Error Codes

Integrated Panel Error Display

Lists error codes displayed on the LPC-600.1-01 integrated panel for troubleshooting.

PLC Interface Operation

LPC-600.2-01 PLC State Diagram

PLC Interface Errors

PLC Interface Error/Warning Indications

ATEX/IECEx System Operation

ATEX/IECEx Operation Precautions

Pump Head Usage

Pump Head Handling

General Warnings and Mounting

Pump Head Removal & Assembly

Removal, Fixation Disc, and Circuit Integration

Troubleshooting

Troubleshooting Methods

Covers troubleshooting for LPC-600.1-01, LPC-600.2-01, and using service software.